30kw CHP Gas Generator Work for Farm with Ce and ISO Certificate
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||500 Sets/Year|
|Payment Terms:||L/C, T/T|
- Model NO.: KDGH30-G
- Gas Source: Biogas
- Power: ＞200kW
- Trademark: Camda
- Specification: 30KW biogas genset
- HS Code: 850220
- Output Type: AC Three Phase
- Certification: CE, ISO
- Standard: Standard
- Transport Package: Plastic Film
- Origin: China
To supply One set of Camda Cummins Gas Generator Set
Generator Set Model: KDGH30-G
Gas Engine Model: HG4B
AC Alternator Model: LSA42.3S4/ 28KW
Voltage: 380V/230V, 400V/230V, 415V/240V
Connection: 3PH, 4WIRE, 0.8 LAGGED
Features of Camda H series gas genset
- Experiment- evidential gas engine technology
- overhaul term: 18000~25000 hours
- Over 85% co-generation efficiency
- Economical and low-cost running: lower gas and oil consumption
- Specially-designed air valves, crankshaft, camshaft, pistons, ignition system and combustion chamber according to international brands gas engine technology(Waukesha, MAN, Doosan)
- 4 air valves design for each cylinder, sufficient air intake and exhaust, more air intake, to realize higher power output and stronger capability of load
- Electronic Air/Fuel Ratio mixer, better combustion and lower emission, sufficient combustion to reduce gas consumption and increase engine heat efficiency, effectively lessen NOX emission.
- Original Cummins engine body, 90% parts made by Cummins China factory, long life and durable engine parts produced strictly accord to ISO9001-2000 International Quality Management System
- Unique air-fuel ratio adjusting system adapting 30%~70% CH4 Methane concentration
- Integrated Crankshaft Forging for gas engine made by Cummins, different from other China brands which the crankshaft is forged by subsections and then assembled into a whole.
- Continuous rating up to 90% of prime power rating.
- Exceed 10-year genset repair and maintenance experience
- Low pressure gas intake, biogas no need boosting pressure
- Larger displacement engine to keep much surplus for genset power output.
- Sound alarm and protection system
- Electrical efficiency higher 10%~20% than other China brands
- With good command of biogas anaerobic technology, we can make better biogas genset, design and testing.
- ISO standard production
- Adopting high-precision special gas engine speed governor: precise speed governing, instant recovering ability so as to fit different loads upon the three signals: rotating speed, load and temperature.
- Precisely-controlled engine air intake and exhaust time.
- Advanced ignition sensor and ECU (Electronic Control Unit) ignition system with computer core:
- Cylinder Block: High quality alloy cast iron for the rigidity performance and good stability.
- Crankshaft and Rod: Robust and fully balanced crankshaft design for a more steadily rotation and higher strength.
- Lubrication System: Dual spin-on filter can separate impurity above 10um effectively and lower cost.
- Less accumulated carbon, reduces the abrasion between cylinder and valve, it can much prolong genset lifetime.
- Compact design: small size and weight
- Wide spare parts availability: Base on Cummins engine parts, the engine base body made of the parts from the supplying factory for Cummins engine China factory.
- Equipped with the most well-known brand generator-Leroy Somer.
- Using advanced intelligent PLC genset controller: capable computer chip, with full monitoring, control, alarm and protecting function, all-in-one configuration for all kinds of demands.
- Electrical system: 24V cranking motor starting and battery charging system.
- Self-contained power genset, needs few accessories.
- Parallel operation with genset or city power grid for option.
- Instant startup configuration for option.
- Free of charge training for operation and maintenance. (at Camda headquarter)
|Ignition system||Ignition Unit||GERMANY MOTORTECH|
|Ignition coil||GERMANY MOTORTECH|
|Ignition cable||GERMANY MOTORTECH|
|Ignition spark plug||GERMANY MOTORTECH|
|Ignition magnetic pickup||GERMANY MOTORTECH|
|Electronic governor (governor,actuator)||FUCHUANG|
|Air filter, Oil filter||Equipped|
|Gas pressure regulating valve||Equipped|
Genset working condition:
Acceptable working conditions:
Ambient temperature : -10ºC~+40ºC
(antifreeze or hot water needed for below -20ºC)
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20ºC, Relative Humidity: 30%.
Natural Gas and Biogas
Acceptable fuel gas pressure: 2~10kPa
CH4 content: for natural gas≥85% CH4 content: for biogas≥55%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel(Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas doesn't include free water or free materials (the size of impurities should be less than 5μm.)
Water content≤40g/Nm3, no free water.
|Gas genset data|
|Continuous power (KW/KVA)||30/37.5|
|Connection (V)||3 Phases 4 Lines|
|Power factor cosfi||0.8 lagging|
|Rated speed (RPM)||1500|
|Open type Genset Overall Dimension (mm)||1800x720x1280|
|Soundproof type Genset Dimension (mm)||2300x1050x1700|
|Net weight without canopy(kg)||900|
|Gas Engine Data|
|Type||4 stroke, water-cooling, dry cylinder liner, electronic-control ignition system, pre-mixed perfect mixed burning|
|Cooling Method||Radiator fan water cooling|
|Governor type(speed regulating type)||Electronic governing|
|Starting method||Electric, 24 V motor|
|The lowest gas consumption(m3/kw.h)||0.3 for natural gas/0.6 for biogas|
|Oil recommended||SAE 15W-40 CF4 or above|
|Brand||France Leroy Somer|
|Rated power||28kW / 3 phase|
|Rated Voltage (V):||380~480 (±0.5%)(AC)|
|Type||3 phase/4 wire, brushless, automatic voltage regulator, drip proof, protected type.|
|Voltage regulation||± 0.5 %(adjustable)|
|Insulation class||Class H|
|Protection class:||IP 23|
|cooling method||wind-cooling, self-heat-rejection|
|Voltage regulating mode||Automatic voltage regulator|
|Compliant with international standards:||IEC 60034-1, NEMA MG1.22, ISO 8528/3, CSA, UL 1446, UL 1004B on request, marine regulations, etc.|
|Controller Data: DSE 8620|
|1. The DSE8620 is an easy to use multi-generator load share system, designed to synchronise up to 32 generators. |
2.DSE8620 is ideal for a wide variety of demanding
load share applications.
3.Designed to work with electronic and non- electronic or gas engine simultaneously
4.Direct USB connection to PC
5. Worldwide language support
6.All communication ports capable of being active at the same time
7.Event log (250 events) ; 8.SMS alert messaging 9.Remote monitoring
10.Configurable inputs (12) 11.Configurable outputs (8) 12.PLC functionality
13.Expansion devices 14.Modbus RTU 15. KW and kV Ar load sharing